News

Cutting Gaskets: Why They Don't Break When Cut

Dec 09, 2025 Leave a message

Why do some gaskets fail to break when cut?

Gaskets are materials that utilize their filling and flexibility to withstand mechanical loads, achieving sealing and shock absorption. When using gaskets, they need to be cut or trimmed to meet usage requirements. However, in practice, many people encounter problems such as rapid blade wear or the gasket failing to break when cutting. This is because gaskets have a certain degree of hardness and toughness, and are not easily broken, so cutting or trimming requires skill.

 

How to Cut Gaskets?

1. Choose the appropriate cutting tool: Gaskets are a relatively hard material, and using manual cutting tools is laborious and prone to wear. Therefore, it is recommended to choose an electric cutting tool. For smaller gaskets, manual cutting tools can be used.

2. Choose the appropriate cutting blade: Gaskets can be cut with metal blades, but an appropriate cutting blade needs to be selected to achieve the desired effect. A blade with appropriate hardness provides sufficient cutting force while maintaining a flat and smooth cut edge.

3. Enhance stability: Stability is very important during the gasket cutting process. Professional clamping devices can be used to fix the cutting pad to the work platform to improve cutting accuracy and efficiency. Additionally, during cutting, the cutting area should be as close to the work platform as possible to increase cutting stability and precision.

4. Keep the cutting edge sharp and clean: Cutting pads wear down the cutting edge quickly, so regular inspection and replacement are necessary. During cutting, the cutting edge should be kept clean and lubricated to improve cutting efficiency and quality.

 

How to solve the problem of the cutting pad not breaking?

1. Replace with a suitable cutting edge: For harder pads, a cutting edge with higher hardness is required to achieve the ideal cutting effect.

2. Increase cutting force: Increasing the cutting force can improve cutting efficiency, but the cutting force needs to be appropriately increased according to the hardness and toughness of the pad to avoid cracking the pad.

3. Adjust the cutting speed: Excessive cutting speed will cause the cutting edge to wear down too quickly and easily cause the pad to break. Appropriately reducing the cutting speed can avoid this.

4. Increase the number of cuts: For thicker pads, increasing the number of cuts can gradually remove the pads and achieve the desired cutting effect.

Send Inquiry